Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 42, No. 2 (2018)

Anthony Siciliano

Anthony Siciliano, Redding, Ct.

“The axle on my 1993 Scag mower broke in half. Since it was welded into the mower’s frame, a replacement part would have cost $1,000. I cut out the old welds, removed the axle, and got a piece of 1-in. cold-rolled bar stock. I cut it to length and took it to a friend who has a large lathe. All we needed to do was to cut grooves on both ends to accept retaining clips to hold the wheels on. Then I welded it into place. After reassembly, it was good to go for another 24 years. Total cost was $25.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.