Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 41, No. 6 (2017)

“Pipe Spacers” Boost Floor Jack’s Lift Height

Featured source: Terry Benoit

Terry Benoit’s standard floor jack didn’t reach high enough to lift some of his farm equipment for service work. So the Orange, Texas, man made stackable “pipe spacers” that let him boost the jack’s reach 6 in. at a time.

“It works great on a lot of my farm equipment,” says Benoit.

“For example, I have a pickup with large tires. The jack can lift only about 19 in. high, but by adding 3 spacers I can increase the total lift height to 3 ft.,” says Benoit. He made the scrapers using scrap 4-in. dia. pipe, 1/2-in. thick round steel plate, and some 1-in. dia. steel rod. He used a metal bandsaw to cut the pipes 6 in. long and then welded a plate onto each end.

“The plates already had holes in them that were just the right size,” says Benoit.

“I welded a 1-in. long rod into the hole on half of the plates. Then I welded a plate with a rod on it to one end of the pipe and an unmodified plate to the other end.” Floor jacks are equipped with a removable, shallow round metal “dish” with a stub rod on the bottom that fits into a hole in the jack’s base. To add spacers Benoit removes the plate and inserts the spacers as needed, then puts the dish back on top.

“The spacers work something like lego blocks. I just place as many spacers as needed on top of each other to get the height that I need,” says Benoit.

“I recently used the spacers to raise the back end of my posi track skid loader so that I could work on the tracks. The floor jack was 2 ft. too short, so I added 3 spacers.”

Contact: FARM SHOW Followup, Terry Benoit, 1077 Bobcat Circle, Orange, Texas 77632 (ph 409 363-2569; [email protected]).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.