Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 41, No. 5 (2017)

Ross Brown

Ross Brown, Millet, Alberta

“I made a tool that fits into the receiver hitch on my pickup and lets me raise the deck on my 54-in. riding mower up off the ground so I can service the blades safely while standing up. It uses a hand-cranked boat anchor winch equipped with a 4-ft. nylon strap, with the winch bolted onto a vertical 4-ft. length of 2-in. sq. tubing. The tubing is welded at a 30-degree angle to a shorter length of tubing that fits into the receiver hitch. The joint where the 2 tubes are welded together is reinforced with scrap metal. I welded a small hook on front of the mower frame.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.