Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 41, No. 1 (2017)

He Replaced Wooden Disk Bearings With PVC Pipe

Featured source: Willard Wickey

“My friend had an old 10-ft. disk equipped with wooden bearings that were worn out. He asked me for help but I didn’t have the right tools to make new round wooden bearings, so I used pvc pipe instead,” says Willard Wickey, Hersey, Mich. The disk’s axle housing is built in 5-in. long sections that bolt together around the axle. Wickey unbolted the sections and replaced the wooden bearings inside them with ones that he made from 2 different sizes of electrical conduit pvc pipe. One pipe (white) was 2 in. in dia. and the other (grey) was 3 1/2 in. He used a chop saw to cut the 2-in. pipe lengthwise and then cut the halves into 4-in. long sections that fit together in pairs around the axle. The sections are spaced 1/2 in. apart inside the axle housing, in order to make room for a series of metal ribs built into the axle that held the original bearings in place. He also drilled a hole in each section to make room for a grease zerk. He cut up the 3 1/2-in. dia. pipe to make a layer of shims that are glued together and fill the gap between the 3-in. pipe and the axle housing.

“I made the pvc pipe bearings last fall. My friend uses the disk on his 1-acre property so it doesn’t get a lot of use. But electrical conduit pvc is as hard as wood, and as long as the bearings are kept greased they work as good as new,” says Wickey. Contact: FARM SHOW Followup, Willard Wickey, 913 170th Ave., Hersey, Mich. 49639 (ph 231 832-1123).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.