Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 41, No. 1 (2017)

Rick Plunkett

Rick Plunkett, Albany, Ky.

“When the air filter on my 2-year-old Toro 5060 zero-turn riding mower got dirty, I replaced it with a much bigger filter designed for a 20-gal. shop vac that I already had. The original filter was only about 4 in. long and a new one would have cost $37, which I thought was ridiculous. A shop vac filter has much more capacity, and costs only about $10. I think the same idea would work on any mower brand or model.

“I cut a piece of Lexan into a large circle to make a base for the filter, and cut a smaller hole in the middle to fit the air intake. To protect the filter I wrapped a section of metal gutter guard around it and secured it with plastic zip strips. I then installed a fine mesh metal screen over the carburetor intake and screwed the filter down on top of it.

“I used the lid off an aluminum cooking pan as a cover for the filter. I removed the handle and ran a long screw up through the filter’s base and out through the pan lid, then put a plastic nut on it.

“I installed the big filter about a year ago and really like how it turned out. Whenever it gets dirty I just use a garden hose to clean it. I kept the original filter in case I ever decide to sell the mower.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.