Larry Wood turned an old Clark forklift mast into a heavy-duty shop elevator by mounting it along one wall and building a platform onto the mast in place of the forks. He uses it to ride up to the upper level of his shop. The elevator is controlled by electrically-powered hydraulics so a simple electric switch is used to move it up or down. Makes it easy to retrieve parts or other equipment from the upper storage area.
“Now I can ride up to the balcony with whatever I want to store,” says Wood.
“The 2-stage mast will lift 2 tons about 12 ft. high, although the barn’s second floor is only 9 ft. above the floor. The platform is big enough that I can load lots of stuff on it.” He attached the mast to a 2 by 6 steel tube located between two of the posts on his shop wall. He welded a steel frame to the mast forks and bolted a 4 by 6-ft. long, 3/4-in. thick plywood floor onto the frame. He made an electric-hydraulic power pack for the elevator by combining a 12-volt hydraulic power unit and a 12-volt battery that’s attached to a trickle charger. Electric-operated elevator buttons are mounted on the forklift and on the wall.
“The elevator only uses power on the way up, so when I push the button it coasts down. I store the elevator at the second floor level just to keep it out of the way,” says Wood. He bought the hydraulic power unit used at a yard sale for $125. He paid $100 for the forklift mast and spent about $200 to rebuild it, adding new rollers and repacking the hydraulic cylinders. Contact: FARM SHOW Followup, Larry Wood,2081 newmans Cardington Rd. Waldo, Ohio 43356 (ph 740 726-2656; [email protected]).
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.