Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 40, No. 6 (2016)

Robert McMahon

Robert McMahon, Knoxville, Tenn.

“I needed a large hold-down clamp on my welding bench for fabrication work, so I made one by modifying a ‘Stronghand’ F-style clamp.

“Start with a 1 by 2-in. piece of channel iron or flat bar and drill a hole for your hold-down bolt. Then weld the channel iron or flat bar to the bottom of the clamp. It’ll result in a super strong hold-down clamp that you can still use as a C-clamp or spreader. Other brands of clamps could be modified as well, but I find that Stronghand F-style clamps work the best.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.