Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 40, No. 3 (2016)

Don Mattes

Don Mattes, Milton, Wis.

“When working away from home I often need to use a cordless drill, but it can be a frustrating experience if the battery goes dead. In the past I would have to go back home and get a drill, often to discover that it had a dead battery, too. To solve the problem I decided to operate a 12-volt drill off my tractor’s battery using 50 ft. of 16-2 lamp cord and 2 clips that attach to the tractor’s battery. I just took the drill case apart and soldered wires to the battery leads.

“Another way I’ve done this is to gut a dead battery and solder wires inside on leads. That way I can still remove the cord and install a good battery when I need to.

“Because many people are switching to higher voltage cordless drills these days, 12-volt drills are cheap and easy to find at flea markets and garage sales.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.