Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 40, No. 3 (2016)

Ray Webb

Ray Webb, Emlenton, Penn.

“Here’s how I remove a 3/4-in. broken stud. First, I drill a 1/4-in. pilot hole in the end of the stud. Then I take a 1/2-in. right hand drill bit and run it in reverse to back the stud out. You might have to sharpen the bit for reverse direction. This has worked well for me many times.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.