Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 40, No. 3 (2016)

Chris Despain

Chris Despain, East Peoria, Ill.

“To remove stubborn bearing races from hubs/drums in medium and heavy-duty trucks, I stuff wet rags in the well of the hub backed up against the race, then weld a bead around the race where the tapered bearing rides. When the weld cools, it shrinks naturally and the bearing taps out easily. I will already have the new race in a freezer cooling off. The residual heat from the welding process helps install the new race. I put a dab of bearing retainer around the race on installation to help install and retain. Also, I sometimes add bearing retainer compound to tighten up a loose race.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.