Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 40, No. 2 (2016)

Chuck Hartman

Chuck Hartman, Ishpeming, Mich.
Chuck Hartman
Photo: FARM SHOW · Vol. 40, No. 2 (2016) · p. 37

“There’s a grease zerk on my Kawasaki Mule’s driveshaft with less than 3/4 in. of room for access. The dealer says the only way to access it is to remove the vehicle’s fuel tank, which is at least a 2-hr. job. Instead, I went on the internet and found the “THE418 Thexton right angle grease coupler” (www.thexton.com; ph 800 328-6277). It fits snugly on the zerk and works like a charm.

“You connect one end of the coupler to the end of your grease gun’s hose. When you’re done, just disconnect the coupler. The job takes only about 5 min. I can see endless applications for this coupler and recommend using it with a flexible hose extension. I bought the coupler at my local Auto Value store.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.