“To lubricate the roller drive chain on my baler, I used about 3 in. of 2-in. dia. pvc pipe and 2 pvc pipes to make a small reservoir. I drilled a hole in one of the caps to fit a brass valve stem from an old pickup wheel. I removed the valve core. To mount it, I drilled a hole in the chain guard so it’s above the chain. After I finish baling for the day, I remove all the loose hay and put oil in the reservoir and run the baler until all the oil has run through the valve stem onto the roller chain. This method lets oil soak into the chain overnight so it’s ready next time I need it.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.