Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 39, No. 4 (2015)

Abner Stoltzfus

Abner Stoltzfus, Leola, Penn.

“Some of the grease zerks on my farm equipment are located in tight corners where I need a hose on the grease gun, and some are in narrow corners too small to reach with my hand and therefore require a solid pipe. I didn’t like having to take both kinds of grease guns with me all the time. So I unscrewed the hose from the pump and slipped a 3/8-in. dia., 8-in. length of conduit over the hose, and then screwed the hose back on. The conduit is just the right diameter to hold the hose tip solidly.

“Whenever I need to use the hose I just slip the pipe back toward the pump to expose the hose. I started using this idea more than 2 years ago and haven’t found a grease zerk yet that I can’t reach.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.