Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 39, No. 4 (2015)

Kerry Kilgora

Kerry Kilgora, Mineral Point, Wis.

“When repainting a house, barn or other building, I often come across isolated small areas where the wood is rotted, especially on window frames. There are commercial hardeners but they’re usually so watery that most of the hardener drops out before it has a chance to work, and the wood has to be below 15 percent moisture. I now use Gorilla Glue to repair all these areas.

“First, I remove the bulk of the pithy wood. Then I fill a disposable large animal syringe that has an 18-ga. needle (available at any farm supply store) with Gorilla Glue. I inject the affected area with the glue. Water activates the glue, the wetter the better. When the glue dries, it will expand to some degree and dry the wood. If it expands beyond the surface of the wood, I simply cut off the excess with a sharp wood chisel and then sand smooth. If the glue doesn’t fill the entire area, I use 2-part auto body putty to fill, spot spraying the putty patch as soon as possible after drying to keep it from absorbing humidity.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.