Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 39, No. 4 (2015)

He Made His Own Fuel Injector Tester

Featured source: Paul Bernier

“My homemade fuel injector tester works great for trouble shooting injector problems on diesel engines,” says Paul Bernier, Geyserville, Calif. He made a tester out of a hydraulic jack from a cab-over truck.

“The jack normally lifts the cab to gain access to the engine. I found that it produces 2,500 psi, which is enough to pop the injector and check the spray pattern,” says Bernier.

“I had to add a pressure gauge, adapt the hydraulic line to the injector fittings, fill the reservoir with diesel, and bleed the line. I watch the gauge while pumping the handle, which lets me see what pressure the injector pops at. The spray pattern is easy to see. It has saved me a lot of time diagnosing problems.” Contact: FARM SHOW Followup, (Paul Bernier, [email protected]).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.