Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 38, No. 6 (2014)

C-Clamp Holder Lets You Set Lit Torch Down

Featured source: Pete Krusch

With a C-clamp and a little welding, Pete Krusch of Cambridge, Vt., made a safe holder for welding and cutting torches.

“I made it so that I have a place to temporarily hold a lit torch while aligning or adjusting pieces to be welded,” Krusch explains. He cut off two small pieces of 1/2-in. ID pipe and welded them to a 6-in. piece of flat iron, which is welded to a C-clamp. Larger 3/4-in. pipe also works for larger torches, he adds.

The length of the flat iron keeps the lit torch at a safe distance from whatever the holder is clamped to. With pipes going in two directions the holder can be clamped on a vertical or horizontal surface. It has come in handy for many applications, Krusch says. Just use common sense where you clamp it. Contact: FARM SHOW Followup, Pete Krusch, 140 Forge Dr., Cambridge, Vt. 05444 (ph 802 644-5358; [email protected]).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.