Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 38, No. 5 (2014)

James Rhodes

James Rhodes, Dayton, Va.

“I’ve seen lots of methods for getting 4020 Deere wheel centers loose from axles. If you can plan ahead, I’ve found that ‘time’ is the best way to do it. Just squirt used oil in the cracks between the wedges, take the cork out opposite the pinion gear pin, and put lots of oil in there. Let it go weeks or even months if you can. Then it’ll all come loose.

“If you’re in a hurry, loosen all big bolts and turn the ‘jam bolts’ up. Strike the end of the axle as hard as you can with a 12-lb. sledge. I’ve never seen it take more than 6 licks to break the center loose.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.