Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 38, No. 3 (2014)

Simple Way To Sand Inside Cylinders

Featured source: Robert Wallrath

“It works great for polishing the inside of any hole,” says Robert Wallrath, Houston, Texas, who came up with this sanding attachment for his 1/2-in. cordless drill. It consists of an 8-in. long, 1/2-in. dia. wooden dowel rod that fits into the drill chuck.

“The end of the dowel rod has a saw cut that’s deep enough to slip in a strip of 2-in. wide coated sandpaper,” says Wallrath.

“The sandpaper wraps itself around the rod, and centrifugal force pushes it out as the dowel turns. It actually does a nicer job than using a file. Works great for removing corrosion from inside a cylinder that covers the tines on my garden rototiller, for example, and for cleaning out corroded brake calipers and other jobs.” Contact: FARM SHOW Followup, Robert O. Wallrath, 7244 Nodding Pines Ln., Houston, Texas 77044 (ph 713 614-5538).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.