“The bearings on the spindles on my Toro riding mower froze up due to corrosion. A new spindle would have cost about $90. Instead, I removed the spindles and then used a grinder fitted with a 3/32-in. cutting wheel to cut 4 corroded bolts out of them. I replaced the corroded bolts with 4 new bolts and nuts, and also installed new bearings. My total cost was only $12.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.