Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 38, No. 2 (2014)

Jack Mosher

Jack Mosher, Genola, Utah

“A lot of people use WD-40 to free up rusted nuts and bolts, but I think JB-80 spray lubricant works even better (ph 626 359-9174; www.justicebrothers.com). Here’s a tip. After applying JB-80, tap the nut or bolt with a hammer, then tighten the nut or bolt a little until it moves ever so slightly and remove it. The vibration caused by tapping makes a tremendous difference and advances the penetrating oil deep into the threads.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.