Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 38, No. 2 (2014)

Joe Hummert

Joe Hummert, Jonesburg, Mo.

“I was having a lot of vibration in my 1972 New Holland square baler, but only under load. Another farmer told me the problem was U-joints that were too tight. I pulled back on the flywheel and felt some play in there so I put in a new bushing and it solved the problem.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.