Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 38, No. 1 (2014)

Pivoting Vise Attachment Clamps Odd-Shaped Parts

Featured source: Ron Iacobelli
Pivoting Vise Attachment Clamps Odd-Shaped Parts
Photo: FARM SHOW · Vol. 38, No. 1 (2014) · p. 39

A bench vise is a necessary tool in any farm workshop, but it does have one limitation: It can’t clamp round or tapered objects in its jaws. I recently came across a new tool that attaches to an ordinary bench vise to hold odd-shaped parts. It opens up a whole new way to approach clamping. It was invented by Ron Iacobelli and his brother Michael. The Gyrojaw is a pyramid-shaped attachment made from a gripping-type elastomer that fits against the jaw of a standard bench vise. It’s designed to clamp things that don’t have parallel faces. A carriage bolt is embedded into one end, and the bolt’s curved head allows the Gyrojaw to be pivoted to many different angles and then clamped tightly against the work piece. Friction and pressure between the Gyrojaw and the vise surface is what holds it in place. The Gyrojaw sells for $12 plus S&H. It can also be used on C-clamps. Contact: FARM SHOW Followup, Gyrojaw, 16280 Softwater Lake Drive, Linden, Mich. 48451 (ph 800 937-5755; www.gyrojaw.com).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.