Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 38, No. 1 (2014)

“Bicycle Wheel” Parts Painter

By Blair Bruce
Featured source: Scott Bruce
“Bicycle Wheel” Parts Painter
Photo: FARM SHOW · Vol. 38, No. 1 (2014) · p. 37

Small parts can often be a challenge to paint on a flat surface – they roll, they don’t dry easily, and they’re hard to handle. Scott Bruce of Ozark, Mo., made a bicycle wheel parts rack that solves the problem. The parts hang from the wheel, which is positioned horizontally off the ground at a comfortable working level so Bruce can stand in one spot and rotate the wheel. There’s plenty of space between the parts, allowing maximum air flow so the paint dries faster. He used a wheel off an old 10-speed bike with the tire removed. It hangs from an angled frame that can be set up anywhere. The parts hang from wire hooks that attach to the wheel spokes.

Contact: FARM SHOW Followup, Scott Bruce, 2108 Logan Ridge Rd., Ozark, Mo. 65721 (ph 573 350-4955; [email protected]).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.