Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 37, No. 4 (2013)

Allen Dilg

Allen Dilg, Gurnee, Ill. (ardilg@yahoo)

“We do a lot of tractor restorations and came up with an easy way to get rid of crud in a vehicle’s fuel tank. Open the drain on the carburetor, and the fuel should run out in a full stream. If it doesn’t, find a 3/8-in. pipe plug, a coffee can, and a piece of fine brass screen measuring about 1 1/2 in. wide by 2 1/2 in. long. Place the coffee can under the fuel tank and remove the sediment bowl assembly which will let some fuel run out of the carburetor and flush out the crud. Then install the pipe plug.

“Clean out the sediment bowl and re-install the screen in the top part of the sediment bowl. Put Teflon pipe-thread sealant on the pipe threads and reinstall the sediment bowl assembly. Then after letting the gas set for a while you can pour it back into the tank.

“I’ve used this method many times with good results. It works a lot faster and easier than removing the fuel tank and then pressure washing it.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.