Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 37, No. 3 (2013)

Vern Goodwin

Individual tip 2 of 3 from this reader’s published contribution.
Vern Goodwin, Lincoln, Neb.

“I converted a stationary 3-jaw lathe chuck into a portable model by mounting the lathe chuck on a round stand made from 1/2-in. thick steel. At the center of the stand I welded a big pipe that screws into the back side of the lathe chuck. I also drilled a hole into the stand to hang it on a wall. I use the lathe chuck’s T handle to move the jaws in or out.

“Works great whenever I have to work on something round, such as a wheel hub. I’ve used it many times to install wheel spokes.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.