Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 37, No. 2 (2013)

Anvil-Mounted “Torch Holder”

Featured source: Robert Stone

“I made a small attachment for my shop anvil that holds my cutting torch exactly where I want it. Works great when I’m forging small parts, because I always have access to heat while I’m working,” says Robert Stone, Seymour, Mo. The one-piece attachment slips over the horn of the anvil and rests on top of it. It consists of an L-shaped angle iron bracket with 2 small tabs that hold the torch in place. The tabs are made from 3/32-in. material and are 3/4 in. wide and about 1-in. long. One tab slips into the base area of the torch, between two hoses that supply oxygen and acetylene, while the other tab slips into a space in the torch head. Contact: FARM SHOW Followup, Robert L. Stone, 1504 Dillon Rd., Seymour, Mo. 65746 (ph 417 767-4395).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.