Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 36, No. 6 (2012)

David McRae

Individual tip 1 of 3 from this reader’s published contribution.
David McRae, Whitehall, Wis.

“I wanted a way to extend the use of hard-to-find tractor tires once they developed breaks in the sidewall. So I made boot inserts out of 10-in. smooth triple-ply belting. I bevel the edge of the cut. Then I bolt the insert over the break using 1 1/2-in. long, 1/4-in. carriage bolts on the inside of the tire, putting the beveled edge against the tire wall.

“If the bevel isn’t smooth enough and seems like it might wear through the tube, I cut a piece of discarded inner tube that’s 2 in. bigger than the boot and bolt it over the top of it. I use a grinder to cut excess bolt threads off to within 1/8 in. of the nut on the outside of the tire. Then I use a ball peen hammer to pound the end of the threads to keep the nut from coming off.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.