“I read with interest in your last issue how Jim Rankin of Paris, Ky., is able to grease wheels without removing the hub. He uses a simple tapered tip that screws onto the end of his grease gun. He drills a 1/4-in. hole in the center of the hub that’s the right size for the tip.
“In 1971 I was field supervisor for J&J Farms near Poplarville, Miss. We were running 5 IH disks 12 hrs. a day and losing one wheel hub per week due to fine dust getting inside the hubs.
“To solve the problem I drilled 1/8-in. dia. holes into the dust caps. Then I cut a 1/8-in. pipe coupling in half, brazed it onto the dust cap, and screwed in a grease fitting. I made sure that our drivers greased each wheel every day until new grease started to show up at the back of the hub. Problem solved.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.