Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 35, No. 3 (2011)

Bert Bitter

Bert Bitter, Black Earth, Wis.

“Many of us have gas-powered weed whips that only run a short time. About 90 percent of time it’s an easy fix. The manufacturers run the gas line through the side of the plastic gas tank by drilling a hole smaller than the outer diameter of the gas line. The gas line slowly gets pinched and chokes off the flow of gas to the carb.

“The solution to the problem is to pull the gas line out and drill a hole in the tank at least one drill size larger. Then soak the gas line in boiling water for a few minutes to relax the pinched section. Reassemble and all should be well. I bought a pallet of 37 returned Sears weed whips and was able to repair 30 of them with this trick.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.