James Coffey, Sr., keeps his lawn tractor in great working condition, thanks to his home-built service lift.
“It lets me access the blades and change the belts or motor oil without having to remove the deck,” says the North Hampton, N.H. man. Being a big fan of Harbor Freight tools, he ordered one of the company’s manually operated motorcycle lift tables. A foot pedal is used to pump a small hydraulic jack that raises the platform. An electric/hydraulic version of the same table is available, but costs more. The platform had to be widened to accommodate the tractor, so he used 1 by 2-in. channel iron to build a frame and bolted it to the platform, then bolted 1 by 6 pressure-treated planks to the frame. Welding angle iron to both ends of the ramp, and then bolting more planks to the angle iron widened the lift table’s ramp. He bought a small electric winch and bolted it to a homemade mast. The mast consists of a length of 2 1/2-in. sq. steel tubing welded to a sq. metal plate with gussets, and is bolted to the lift’s deck. A cross-arm on top of the mast supports the winch. A friend in the sheet metal business made a metal box to keep rain and snow off the winch. The tractor had been modified years before with a front drawbar that’s now used to lift the tractor.
“The pedals that operate the lift had to be lengthened, because the modified platform is now over 50 in. wide and the pedals would have been covered and inaccessible with the mower deck in the down position,” says Coffey.
“The only problem we have is when we put a tractor on the lift table with an under seat-mounted, rear fill fuel tank. If the tank is full and we raise the front end of the tractor, fuel pours out the fill neck. So we try to do any service work after we’re done mowing, or before we fill the tractor with fuel.” Contact: FARM SHOW Followup, James Coffey, Sr., 221 Post Rd., North Hampton, N.H. 03862 (ph 603 964-8902).
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.