Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 34, No. 5 (2010)

Torque Multiplier Loosens Stuck Bolts

Featured source:

Get rid of that cheater pipe, says Graham Keeney, and make your own torque multiplier to break loose rusted bolts.

“This is a lot safer; it doesn’t slip off,” says the retired International Falls, Minn., trucker.

“You can really pull with it.” Keeney needed something to break loose rusted trailer spring U-bolts. So he purchased a 24-in. long 1/2-in. socket drive breaker and removed the drive at the end. Then he cut off two 1/4-in. hardened steel chain links and cut out 5/8-in. gaps in one side of each of the links. He used 7018 rod and welded one chain on the end of the breaker and the other one 4-in. back. The gap is just enough to slip in the handle of open and box end wrenches and twist them in securely, Keeney explains. He’s used his homemade tool with 3/4 to 1 1/8-in. wrenches. He hasn’t come across any bolt that he couldn’t break open with his torque multiplier, although he sometimes uses a little heat on badly rusted nuts and bolts.

“It was very simple to make, and it does the job,” Keeney says.

Contact: FARM SHOW Followup, Graham Keeney, 3913 Highway 11, International Falls, Minn. 56649 (ph 218 283-2360).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.