Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 34, No. 5 (2010)

Samuel Borkholder

Samuel Borkholder, Shipshewana, Ind.

“While adding a lean-to onto a farm shop, we had to remove some old metal that was nailed on through 2-in. thick insulation. The farmer we were working for suggested we try his specially-made nippers, which had a 1/2-in. dia. by 16-in. long rod welded to one handle. Once the nipper is hooked on under the nail head, a sliding weight on the rod is used to pull out the nails. It worked great without damaging the metal.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.