No need to switch to an alternator for better starting on an older tractor. G&R Rebuilding will convert your original generator from 6 to 12 volts so everything is original except the starting power.
“We gut the generator and replace the internal components,” says Greg Snow.
“You’ll still have the original generator on your tractor so the appearance won’t change like it would with an alternator.”
The way an otherwise perfectly restored tractor looks with an alternator is one reason his business is booming.
“We’re constantly looking for old generator cores to rebuild,” says Snow.
He usually charges $150 to rebuild the generator and another $50 for a regulator. Often that’s all that’s needed.
“Going from 6 to 12 volts is easy with most tractors other than the Ford N-Series,” he says.
“Most models can use the original 6-volt starter but the way the N-Series starter is built, the drive comes in backward, and with 12 volts it will turn so fast it can tear up the flywheel. With the N-Series, you need to rebuild the starter too.”
While that rebuild can run another $150 to $175, it’s a “clean” rebuild, Snow adds, as no solenoid is needed.
Most 6-volt starters are heavier duty with larger wires than on a 12-volt starter. Snow says the wire size has a lot to do with whether the starter needs to be rebuilt.
In addition to 6 to 12-volt conversions, G&R does general remanufacture of starters, generators and alternators. They also carry a full line of standard replacements for auto, truck, marine, ATV and industrial vehicles. They rebuild all types of DC motors as well.
Snow says the biggest challenge with rebuilding (outside of rust) is finding parts to work with. He says he spends a lot of time trying to track down good quality parts. If he doesn’t have the parts for a rebuild available, he may make them. He makes many of his own bushings and starter posts as well as re-builds drives.
If he can, he will repair damaged parts, such as nose housings for starters. If not, finding the parts can be difficult and expensive when they are found.
“I had a customer who needed a John Deere 70 starter,” he relates.
“I had to pay $370 for an old core out of a scrap yard with no guarantee it would work. Guys who know what they have, know what they can charge.”
Snow says he takes pride in doing the job that he is given and doing it right. He says he has only failed to find a part twice in 28 years.
“You can always send a part off to be made, strengthen old wood. It also works with rusted metal and fiberglass as it penetrates well and sets up much faster than fiberglass resins. It sets up so quickly that it can harden as it pours. It’s good in the field as a quick, yet enduring fix for fiberglass snowmobile and ATV parts. It sets up more slowly when cooled to just above freezing - about 30 minutes - which allows a longer working time. At room temperature it hardens in three minutes.”
Within 10 min. the epoxy is hard enough to saw, sand, drill, paint or do anything else you can do with wood, cement or metal.
Mengay says he uses PolyAll 2000 regu-but it may cost more than it is worth,” he says.
“John Deere 70 nose cones break a lot. I checked with a foundry to see if they could get a housing recast, but tooling cost and startup required a minimum order of $100,000.”
Snow says he is constantly searching for cores and other replacement parts he can buy. He told FARM SHOW he would welcome calls from anyone with parts they were willing to sell. Often all he needs is a part number, such as is found on the tag on all Delco parts. He notes that prices even for cores can vary dramatically from $5 to $100.
Contact: FARM SHOW Followup, G&R Rebuilding, 460 N. Prior Ave., St. Paul, Minn. 55104 (ph 651 644-7743 or 888 210-7743; fax 651 644-2231).
stabilize it, Mengay explains. It penetrates and strengthens the wood and seals against water, contamination, insects, mold and fun-gal damage. It’s also popular with contractors for restoring hard to replace insect damaged or rotted logs in log buildings. It can be colored with powdered, organic dyes and used with fillers like sawdust, sand and metal powders.
“We’re also looking at trying to get involved with disaster work companies, where a lot of the problem is water damage,” Mengay says.
PolyAll 2000 is sold in three sizes: $20/ 8oz., $40/32 oz., and $60/64 oz. (plus S&H).
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.