Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 33, No. 1 (2009)

Chad Travis

Individual tip 1 of 2 from this reader’s published contribution.
Chad Travis, Drasco, Ark.

“A common problem with front tractor wheel rims is that the lips can get bent, allowing dirt to get under the bead. I use my tractor in the woods to pull logs and also to run a homemade rock picker. So it gets used hard.

“To keep the rim from bending, I take the tire off the rim and then weld a 3/8-in. metal rod inside the lip. I weld one end in place and then bend and hammer on it as needed to fit it into place around the rim, welding as I go. This works well and can be done on most all sizes of wheels. I use a piece of string to measure how long a rod is needed.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.