Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 33, No. 1 (2009)

Buck Trimble

Individual tip 1 of 2 from this reader’s published contribution.
Buck Trimble, Mt. Sterling, Ky.

“I have arthritis so my hands don’t work as well as they used to. To help remove clip pins from the tractor drawbar, I came up with a little tool that works great when changing implements. It’s especially handy when I’m working with gloves on. The tool is a slim, long neck screwdriver. I used a small propane torch to heat the blade in my vise so I could bend it into a hook.

“The screwdriver I used happened to have a rubber handle so it really works good. The screwdriver’s long stem really comes in handy if I have to reach under the drawbar. I mounted a small I-hook on my tractor’s rear fender so I can keep this tool with the tractor all the time. Most of the time when I pull a clip pin out it stays on the screwdriver. If I drop the pin on the ground I can just reach down and hook it without having to remove my gloves.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.