Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 31, No. 2 (2007)

“Carousel Shop Table”

Featured source: Wess Cornelius

“It puts my shop tools right at my fingertips without having to do any walking,” says Wess Cornelius, Winlock, Wash., who converted a round wooden kitchen table into a rotating shop table.

He started with a 4-ft. dia. wooden table with a single leg leading down to a metal base. He cut the pipe off, then slipped an-other pipe of smaller diameter inside the cut-off pipe, Then he welded the smaller diameter pipe to the base of the table.

He can raise the table to the elevation he wants by adjusting a collar that he mounted on the bottom pipe.

“It’s amazing how well it works,” says Wess.

“Sometimes I line up tools and parts around the entire perimeter of the table. That way I can stand in one place and work on multiple facets of a project. I lay something out, and as I need a tool or part I can grab hold of the table and bring the tool to me. I bolted a vise to the table because a vise comes in handy for many different projects. ” Contact: FARM SHOW Followup, Wess Cornelius, 1312 Ferrier Rd., Winlock, Wash. 98596 (ph 360 785-4178).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.