Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 31, No. 1 (2007)

Don Ickes

Don Ickes, Osterburg, Penn.

“I used a pair of steel I-beams and other salvaged materials to come up with low-cost ‘grease mon-key’ ramps. They work great for changing oil on vehicles, removing the blades from my riding mower, and many other jobs. The ramps are set up on a slight hillside, with one end of each I-beam lying on a pile of dirt. The other ends are supported by a steel post out of an old boiler furnace.

“The I-beam simply sets on top of an 8-in. wide steel flange on top of the post. The bottom end of each post sets in a length of channel iron. I can vary the width of the ramps by simply moving the posts in or out of the channel iron, and then picking up the other end of the I-beams by hand and sliding them over. The ramps can handle a lot of weight - I’ve even driven a 2-ton dump truck up onto them.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.