Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 30, No. 6 (2006)

Replacement Main Bearing For Deere Diesel Tractors

Featured source: Scott Wichlacz

If you own a Deere 80, 820, or 830 diesel tractor, you’ll be interested in these new replacement main bearings for the engine crankshaft.

“Our bearings are manufactured to Deere specifications from the correct aluminum alloy, unlike Deere’s own bronze replacement bearings which will seize up,” says Scott Wichlacz, Manitowoc Motor Machining & Parts, Inc., Manitowoc, Wis.

There’s a need for these bearings, says Wichlacz.

“The problem is that Deere re-cently changed from the original aluminum alloy to a bronze alloy that is incorrect for rotating motion. When this new bearing is installed it can seize the crankshaft almost immediately, sometimes stopping the engine dead within 15 minutes of start-up. Some owners have even had to replace expensive engine parts that got damaged.

“The bearings we sell are made from the same special aluminum alloy that Deere used in the past. They won’t seize up.”

Sells for $139.58 plus S&H. Contact: FARM SHOW Followup, Manitowoc Motor Machining & Parts, Inc., 2308 Franklin St., Manitowoc, Wis. 54220 (ph 920 684-8577; fax 920 684-8599; [email protected]; www.motor machining.com).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.