Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 30, No. 3 (2006)

Ken Voigt

Individual tip 1 of 2 from this reader’s published contribution.
Ken Voigt, Wausau, Wis.

“Here’s a photo of a drill press I converted to electric drive. The drill press was probably called a blacksmith’s drill and was originally designed to be hand cranked. It was patented June 8, 1907 by CB & F Co. of Lancaster, Penn. What I like about this unit is its automatic down feed, which operates at the top. A notched wheel is turned by a pawl off a cam, which turns a threaded shaft connected to the chuck shaft. I can clamp a piece down and do something else while the machine drills away. I rigged it up with a 2 hp electric motor. It can drill 1-in. dia. holes with no problem.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.