Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 30, No. 3 (2006)

Alan Carender

Alan Carender, Williamsburg, Ind.

“I made a welding aid out of a 1-in. thick, 4-in. wide and 20-in. long piece of copper bar by drilling and then tapping several 3/8 and 5/ 16-in. holes in it. I can bolt objects to it that need repair - like a cracked or busted manifold - to hold it in perfect alignment for welding. I also use old rocker arms and washers to hold down uneven objects.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.