“To make a rip and cross cut guide for panels, start with a piece of 1/4-in. thick plywood that’s 8 ft. long by 12 in. wide. Set your power saw on the plywood like you’re going to rip it, with the blade just touching the wood. Then measure over 1/4 in. away from the edge at both ends of the 8-ft. length, and snap a line from end to end. Screw a 1 by 2 to the plywood along the line, then place the edge of the saw’s shoe plate against the 1 by 2 and rip off the 1/4-in. excess. What you now have is an accurate rip and cross cut guide. Just position it on the mark to cut, clamp the guide to the panel you want to cut, and you’ll be able to make a cabinet grade cut.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.