Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 29, No. 3 (2005)

Neil Schumacher

Neil Schumacher, 42804 385 th Ave., Lind- say, Neb. 68644 ph 402 923-1037; email

[email protected]: “Our new four-wheeled torch/caddy is easier to maneuver and more stable than other models on the market so it’s not as likely to tip over. It’s also easy to load and allows you to place the cylinders in line rather than side by side. As a result it measures less than 24 in. wide. It’s designed to hold standard cylinders up to 9 1/4 in. diameter.

“The caddy is made from powder coated steel and rides on a pair of 15 1/2-in. high pneumatic wheels in front and two smaller 8-in. solid rubber tires on back. Conventional torch caddies have two smaller wheels on back, so when you tip the caddy back and wheel it around you have to do a balancing act. With our four-wheeled caddy there’s no problem with stability.

“We can make units for either propane or acetylene. The caddies sell for $160 to $180 plus S&H.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.