Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 29, No. 3 (2005)

John Boogaart

Individual tip 1 of 2 from this reader’s published contribution.
John Boogaart, Blenheim, Ontario

“Our 6-furrow moldboard plow is quite long and we found it difficult to keep the rear of the plow at the desired depth. On this plow the in-furrow tail wheel was equipped with a hydraulic cylinder to raise and lower the plow. The land side wheel had a hand crank screw adjuster on it. We replaced this adjuster with a cylinder. It’s much easier now to keep the rear of the plow at the desired depth, in varying field conditions.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.