“I have heavy, wet clay soil on my farm that sticks to the rubber gauge and press wheels on my Krause no till drill. It also plugs up the wheels in front of the drill’s double disc openers.
“To solve the problem, I removed both sets of wheels. Then I bought an old Deere 400 rotary hoe, removed the hoe wheels, and bent the tines to a 90 degree angle. The original wheel bearings were frozen up so I replaced them with new ones. Then I bolted the wheels to the mounting arms on the drill. The bent spokes on the rotary hoe wheels penetrate the ground without picking up wet soil. Now my drill pulls easier, and beans emerge just as well as if I used rubber wheels, if not better. The rotary hoe wheels also do a better job of closing the trench and covering the seed. They crush the seed trench and ‘cave in’ enough soil to adequately cover the seed.
“These Deere 400 rotary hoes can be bought cheap at auctions or junk yards. The bearings on the rotary hoe wheels happen to be the same size as the bearings on the Krause drill’s wheels so they’re a perfect fit.
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.