Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 28, No. 4 (2004)

Richard Ackerman

Richard Ackerman, Columbia, S.Dak.

“I purchased an older 440 Bobcat with a bad engine. I overhauled it but it didn’t last long. I bought a new engine and before long I had to overhaul that one, too. Soon after, it blew up and I decided to go a different direction. I installed a 40-hp. Air-cooled VW engine in it.

“The engine was surprisingly easy to install. I machined the flywheel to accept the variable speed pulley and I had to weld supports on the front pulley to drive the hydraulic pump.

“This engine is a much better fit than the original one, with enough power to outperform other similar size skid steers. I have been using it now for 12 years with no problems. What’s more, I’ve installed VW engines in some of the neighbors’ Bobcats.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.