Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 28, No. 2 (2004)

Robert Dixon

Robert Dixon, Oxford, N.C.

“I bought a used Allis Chalmers 8030 4-WD tractor from the early 1980’s. We got it cheap because it was smoking quite a bit, although it seemed to run okay. I figured I could rebuild it and come out okay.

“After we got it home we did everything under the sun short of rebuilding the engine, including replacement of the injectors and rebuilding the pump. It still smoked like a freight train and we just couldn’t figure out why.

“I finally talked to a very knowledgeable diesel mechanic at a local shop to see what he thought. He suggested we check to make sure the injectors were installed correctly. We went to a neighbor who also had an 8030 and discovered that his injectors were turned 180° from ours. Our injectors were still installed exactly as they were when we bought the tractor. But apparently they were wrong. It’s confusing because on the 7010 and 7020 Deeres, the injectors can be installed either way. But on the 8030 they can’t.

“Once we got the injectors turned around, the tractor ran like a top with no smoke. What’s more, it had 35 percent more horsepower. We got a heck of a tractor for a bargain price.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.