“I made the frame of this hydraulic press out of old bulldozer parts. It runs off tractor hydraulics and has a ‘bed’ made out of a 6-in. wide, 3/4-in thick steel plate. The 6-in. dia. hydrau- lic cylinder is off an overhead loader and has a 3-ft. stroke so it can develop a tremendous amount of pressure, applying up to 45 tons when used with a newer tractor equipped with a 3,000-lb. pump. Using the tractor’s variable flow hydraulics I can slow the press down so much that I can barely see it move. Because of the slow speed it works great for straightening out objects. It can easily bend a 3/4-in. thick piece of metal at a right angle. We have different attachments to fit the shaft. One time we used this press to take a 90 degree bend out of a 4-ft. long hydraulic cylinder shaft.
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.