It took Jacob May only about an hour to make a set of portable car ramps, using nothing but his cutting torch, welder and a bit of scrap metal.
May welded pieces of 1-in. thick flat steel tubing to a pair of 15-in. car wheels.
“The car ramps you can buy are made out of sheet metal, so they’re not that safe,” May explains.
“Because the rims have a lip on them, the vehicle’s tire fits inside the lip and you don’t have to worry about your vehicle rolling.”
May cut a curve into the flat tubing with a cutting torch and then welded them to the rims.“They were real simple to make and they work really well. You can easily move them around your shop as needed.”
Contact: FARM SHOW Followup, Jacob May, HC 53, Box 21, Interior, S. Dak. 57750 (ph 605 455-2425).
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.