
Put this new gadget on a power drill and you’ll be able to cut through sheet metal, vinyl, steel mesh, ductwork, automotive body panels and thin sheeting.
The Turbo Shear attaches to standard 3/8-in. or larger drill chucks, and requires a minimum 1,200 rpm’s.
The TurboShear is capable of navigating tight curved patterns and square cuts, according to the company. Blind cuts require only a 1/2-in. starting hole. It’ll cut through up to 20 ga. galvanized steel. Suggested retail price is $49.95 and it’s available from heating and air conditioning wholesalers and also at www.amazon.com.
Contact: FARM SHOW Followup, Malco Products, Inc., Box 400, Annandale, Minn. 55302 (ph 800 328-3530 or 320 274-8246; fax 800 206-6760 or 320 274-2269; email: [email protected]); website: www.turboshear.com).
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.