Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 27, No. 5 (2003)

Tom Billingsly

Tom Billingsly, Buckeye, Ariz

“Here’s an idea that a custom manure-hauling contractor came up with for his trucks with side-mounted gas tanks. He was working in extremely dusty, dirty conditions, hauling sludge onto cotton fields. The problem was that he had to keep changing fuel filters on the trucks because of sediment that would get into the fuel when refueling, or for other reasons. He told me he finally solved the problem by screwing a short length of pipe into the bottom of each gas tank. He simply put the pipe in the drain-out hole and put a cap on the pipe.”

What would happen is that as the diesel fuel sloshed around in the tank, sediment would settle down into the short piece of pipe. Every few days he would simply unscrew the cap and let a bit of fuel wash out onto the ground, clearing the sediment.

“It’s very simple and kept the fuel filters relatively clean. It gets the big stuff. Floating sediment still goes through the filter. The idea would work on any gas tank you can attach a pipe to.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.